Transmission Belts ( “TRANSARM” Belting )

Transmission Belts
Industrial transmission belts are rubber frictioned, “hard/soft” cotton duck, compact, closely woven for tensile strength, with adequate weft strength for fastener holding. These rubber transmission belts are impregnated with special toughened and resilient rubber compound with maximum adhesive properties and anti-oxidants to retard ageing.

Plies laminated together under tension to remove stretch and by high pressure vulcanization formed into belting of solid strength and flexibility.

1. “Transarm” in 'Black Seal' quality, laminated with black square treated edges, is made from 34 oz, 31 oz Hard Duck.

2. “Transarm” in 32 oz, 28 oz Soft Duck, 'Blue Seal' quality, is made to order in laminated square edge construction. Folded, round edge belting is also made against specific orders.

Characterisitcs
1. Tough, durable belting, with flexibility but little stretch

2. The 'hard' rubber frictioned duck withstands abrasive wear under prolonged severe conditions : --
¤ Has a high coefficient of friction thus belts can be run at minimum tension.
¤ Good holding for belt fasteners, elevator bucket bolts, slats etc.

3. “Transarm” belt can withstand intermittent shock loads: --
¤ Perform heavy duty under all conditions except excessive oil.
¤ Operate out of doors, even in extreme climatic conditions.

“Transarm” belts can be supplied both open end and endless.

Application
1. Power transmission
¤ Industrial drives of all types
¤ Laundry, milling, agricultural machinery
¤ Quarry plant

2. Conveying (Flat or Troughed)
¤ Parcels, packets, cartons etc.
¤ Grain, animal foods etc.

3. Elevating
¤ Bucket elevators for grain etc.

Horse power capacity

Belt speed Feet per min. M/sec.		3 ply	4 ply	5 ply	6 ply	7 ply	8 ply	9 ply	10 ply
		Horse power transmitted per 1" (25 mm) of width
500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000	2,5 3,8 5,1 6,4 7,6 8,9 10,2 11,4 12,7 14,0 15,2 16,5 17,8 19,1 20,3 21,6 22,9 24,1 25,4	0,60 0,90 1,21 1,51 1,81 2,12 2,42 2,72 3,03 3,33 3,63 3,93 4,24 4,54 4,84 5,15 5,45 5,73 6,06	0,90 1,36 1,81 2,27 2,72 3,18 3,63 4,09 4,54 4,99 5,44 5,90 6,36 6,81 7,27 7,72 8,18 8,63 9,08	1,21 1,81 2,42 3,03 3,63 4,24 4,85 5,45 6,06 6,66 7,26 7,87 8,48 9,09 9,70 10,30 10,90 11,51 12,12	1,51 2,27 3,03 3,79 4,55 5,30 6,06 6,82 7,58 8,34 9,10 9,85 10,60 11,36 12,12 12,88 13,64 14,40 15,16	1,81 2,72 3,63 4,55 5,45 6,36 7,27 8,18 9,10 10,00 10,90 11,81 12,72 13,63 14,54 15,45 16,36 17,28 18,20	2,12 3,18 4,24 5,30 6,36 7,42 8,48 9,54 10,60 11,66 12,72 13,78 14,84 15,90 16,96 18,02 19,08 20,14 21,20	2,42 3,63 4,84 6,06 7,27 8,48 9,70 10,90 12,12 13,32 14,52 15,74 17,96 18,18 19,40 20,60 21,80 23,02 24,24	2,71 4,08 5,44 6,82 8,17 9,54 10,90 12,27 13,64 14,99 16,34 17,71 19,08 20,44 21,81 23,17 24,54 24,91 27,28

Rubber Sheeting

Anil Rubber offers wide range of rubber sheeting with supplies going to all markets for varied applications in different geographical areas. These rubber sheets are suitable for tear and wear resistance, abrasion resistance, low & high temperatures, acids and bases, ripping and tear, flame and gases; grease and oils and is suitable for even food applications. These are offered in thickness ranging from 1.5 mm to almost 100 mm and width up to 1500 mm. These can be given in strips, sheets and rolls.